Showing posts from May, 2017

EMG-6 "Shop Notes" May 2017

"EMG-6 Shop Notes" is a day-to-day accounting of what's going on in the shop with the EMG-6 Electric Motor Glider.

May 29, 2017 We have added another series of drawings to the builders database.

Bending Sheet Metal (Part 2) Sport Aviation / Experimenter "Technically Speaking" Article May 2017

Bending Sheet Metal  (Part 2) In part one of this article we discussed, in depth, the theory and the process for developing a flat layout for manufacturing a sheet-metal part. In this article, we will take it to the next step: the practical process of converting the flat layout to a bent sheet-metal part. The tool that we use for bending sheet-metal is called a “brake.” There are several different types of brakes.  A “press brake”, commonly found in manufacturing environments, uses a vertical positioned die bending the sheet-metal over a stationary “V” block.  A “cornice” brake, which has a solid clamping bar the full width of the brake, is limited to simple straight bends. And the “box and pan” brake. The box and pan brake is sometimes referred to as a finger brake because of its individual fingers which can be configured in a nearly unlimited fashion to make some of the most complex sheet-metal parts. If you are interested in purchasing a sheet-metal brake for building experimental…

Getting Started

How to Get Started Building the EMG-6      Updated May 20, 2017 1  Follow the Project Progress Blog (Shop Notes) The "Shop Notes" blog follows the progress as we design, build, and fly the EMG-6. This progress blog contains most of the up-to-date information about what is happening within the company and the project. 
If you do nothing else make sure that you follow the project. Subscribe to the YouTube channel. Subscribe to the website and blog to get automatic updates of the most recent information.
YouTube Channel Link to and subscribe to the YouTube channel . The YouTube channel contains multiple videos on designing, building, and flying the EMG-6. Subscribe Remember to subscribe to the website and blog. After entering your email address you will receive a confirmation email which you must verify in order to receive email updates.

May 2017 Light Sport Repairman Maintenance Class

Class Photo Album May 2017  Light Sport Repairman Maintenance (LSRM) Class

Bending Sheet Metal (Part 1) Sport Aviation / Experimenter "Technically Speaking" Article April 2017

Bending Sheet Metal (Part 1)
We are often surprised by the number of aircraft builders who seem to be intimidated by the process of calculating bend allowance, setback, and simply creating a flat layout for bending a simple part. In this article we are going to back up a bit, and provide some of the theory necessary to understanding how we go about the process of converting a flat piece of sheet metal into a complex sheet metal component. Learning to accurately layout and bend sheet-metal is a very useful exercise. Once you have mastered the process, you will find that it not only saves a great deal of time, but also can save you a great deal of wasted material.
To start with, let’s examine some of the properties of aluminum sheet metal used in aircraft. The two most common alloys of aluminum used in the experimental aircraft world are, 6061 T6, and 2024 T-3. 6061 is one of the least expensive and most versatile of the heat-treatable aluminum alloys. 6061 T6 has a tensile strength of…